I recently put a new hard drive in my computer. I have a TV tuner card installed and it was working fine. After the hard drive install, I cannot get it to work. It keeps saying it cannont initialize the video and that there is some other video program running. I also have lost my codecs for my DVD rom. To buy other codecs I would practically have to buy a new DVD rom. Any advice on a cheaper way to get the codecs would be appreciated. I haven't moved any of the files to the new hard drive. The old hard drive still has all the original files. The second hard drive is just a storage drive.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations gkittelson on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Hardware problems
- Thread starter 79mustang
- Start date
Only thing that really changes is the Order of the Drives. If you had a device driver that expected a device to be at D: and now the Device is at F: that might make a difference. Depends how smart the driver is. DVD's typically set the DMA to the Drive and make some settings in the Registry. Messing with the Drive order can drive Windows nuts. I think in XP you can change the drive order somehow. There may also be a registry Hack. Try asking this question in the Operating System Forum too.
I have seen similar problems with CD R drives.
If you do not like my post feel free to point out your opinion or my errors.
I have seen similar problems with CD R drives.
If you do not like my post feel free to point out your opinion or my errors.
- Thread starter
- #3
- Status
Similar threads
- Locked
- Question
