Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Hardware pc hangup
- Thread starter rhedden
- Start date
webmaster999
IS-IT--Management
Hey!
Have you tried going into CMOS and setting it to AUTO (detect) all hardware in Standard CMOS Settings?
You can also try autodetection in CMOS;
or, unhook all storage devices from the mobo and go into CMOS and set all settings in Standard to none, then go back out and rehook everything one by one and detect them in CMOS.
Clear as mud?
Matt A+, MCP, MCP+I, MCSE Windows NT 4.0, MCSE Windows 2000 Early Acheiver with Security Emphasis
Any advice I give is my best judgement based on my interpretation of the facts you supply.
Help increase my knowledge by providing some feedback, good or bad, on any advice I have given and if you like my advice, please mark it as helpful.
Have you tried going into CMOS and setting it to AUTO (detect) all hardware in Standard CMOS Settings?
You can also try autodetection in CMOS;
or, unhook all storage devices from the mobo and go into CMOS and set all settings in Standard to none, then go back out and rehook everything one by one and detect them in CMOS.
Clear as mud?
Matt A+, MCP, MCP+I, MCSE Windows NT 4.0, MCSE Windows 2000 Early Acheiver with Security Emphasis
Any advice I give is my best judgement based on my interpretation of the facts you supply.
Help increase my knowledge by providing some feedback, good or bad, on any advice I have given and if you like my advice, please mark it as helpful.
- Status
Similar threads
- Locked
- Question
- Locked
- Question