Hardware - For Dummy

[rafiki47]

Hello everyone,
I recently purchased a preconfigured Sunfire V440 with Solaris 10. I also bought an HBA and installed it.When I opened the card it had no driver disk. So when I went online to look for them it said that they are included in Solaris 10. So the card is installed, but how do I get the OS to see/use the card?

 

[djr111]

you can do do any of the 3:

from root: devfsadm <enter> (this is the fastest of the 3, since no reboot is required)

from 'ok' prompt boot -r <enter>

or from root: reboot -- -r <enter>

 

[dandan123]

One more method -

as root

touch /reconfigure
reboot