I'm working with a Gateway P5-166, I have installed Windows 95 version B, after installing a Diamond Edge 3D video card, on restart it will still detect a PCI Standard VGA device. Even tho in the device manager the Diamond Edge will be present in the list. What do I need to do keep it from detecting the device everytime I restart? I have gone every avenue I can think of.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations gkittelson on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Hardware detection problem
- Thread starter MCR
- Start date
- Thread starter
- #3
Thanks Technos
Think I have the problem solved. I just went the normal way of setting it up when windows detected it, after it searches for a driver and doesn't find on. It will say to check other locations, I just click on finish. There will be a second device listed in the Dispaly adapter in device manager with a yellow exclamation mark. All in all, that device is not conflicting with the main display adapter so you just have to leave it alone as its not doing any harm.
I now don't have win 95 detecting new hardware after restarting
Think I have the problem solved. I just went the normal way of setting it up when windows detected it, after it searches for a driver and doesn't find on. It will say to check other locations, I just click on finish. There will be a second device listed in the Dispaly adapter in device manager with a yellow exclamation mark. All in all, that device is not conflicting with the main display adapter so you just have to leave it alone as its not doing any harm.
I now don't have win 95 detecting new hardware after restarting
- Status
Similar threads
- Locked
- Question