hardcoding the eri interface

[syjl]

I have v120's wtih the eri0 interface and the following syntax in /etc/system does not work on the interface even after the reboot and with the switch port set to 100 full. Ideas??

*hardcode the ethernet connection
set eri:adv_autoneg_cap=0
set eri:adv_100T4_cap=0
set eri:adv_100fdx_cap=1
set eri:adv_100hdx_cap=0
set eri:adv_10fdx_cap=0
set eri:adv_10hdx_cap=0

 

[sendhilk]

Try this
set eri0:eri_adv_autoneg_cap=0
set eri0:eri_adv_100T4_cap=0
set eri0:eri_adv_100fdx_cap=1
set eri0:eri_adv_100hdx_cap=0
set eri0:eri_adv_10fdx_cap=0
set eri0:eri_adv_10hdx_cap=0