Hi,<br>i developt a modem communication program. I am using Hayes commands for the connections. But when i connect another computer by using modem, i can't han up it. I know ATH command hang-up modem but i could'not do it. <br>Is there any Visual C++ command for hanging up modem. Or how can i do it.<br>thanks
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Hang Up
- Thread starter omeryesil
- Start date
Dear omeryesil,<br><br>Nope, you have the right idea. I sort of remember that if you've been sending data through the modem you send it a double plus command to put it back into command mode so that it will respond to the ATH. By double plus I mean:<br><br>++<br>then<br>ATH<br><br>Then also I seem to remember that some modems vary the Hayes commands slightly, like maybe it's ATH0 (0) is a Zero.<br><br>However it's been a looooong time since I've done this so I may be way off base here.<br><br>Hope this helps<br>-pete
- Status