Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Handset Volume on 7406+

Status
Not open for further replies.

TelcoJohn

Technical User
Jan 22, 2013
20
US
Can anyone tell me how to adjust the handset volume on the 7406+ model phone? The regular 7406 has the slider near the handset plug, but its gone on the 7406+. Someone's dad must know how to adjust these old things.

Thanks
 
slider is for ringer volume
volume adjustment is for speakerphone

Maybe you can get someone's Dad to read this to you.

7406BIS documentation

Special handsets were used for volume control

7400 Series

Code:
R2H1    HANDSET R2H1 BLK                      105519086
R2H1    HANDSET R2H1 M CRM                    105520787 
R6      HANDSET AMP HARD OF HEARING R6 BLK    106053416 
R6      HANDSET AMP HARD OF HEARING R6 M CRM  106053424 
R8      HANDSET NOISY LOCATION R8 BLK         106502990 
R8      HANDSET NOISY LOCATION R8 M CRM       106503006


A great teacher, does not provide answers, but methods to teach others "How and where to find the answers"
Avaya. Too little or no help? Expensive?
For FAST switch support at bargain rates, give bsh a call.

bsh

40 years Bell, AT&T, Lucent, Avaya
Tier 3 for 30 years and counting
[URL unfurl="true"]http://bshtele.com[/url]
 
7406 Plus Documentation

A great teacher, does not provide answers, but methods to teach others "How and where to find the answers"
Avaya. Too little or no help? Expensive?
For FAST switch support at bargain rates, give bsh a call.

bsh

40 years Bell, AT&T, Lucent, Avaya
Tier 3 for 30 years and counting
[URL unfurl="true"]http://bshtele.com[/url]
 
Wow,
Digging about 20 years back in my memory: there is an option to be set globally,per set type:

"DCP Terminal-parameters Plan:
Appears only when the Multinational Locations feature is enabled in the license file. The value
in this field corresponds to the DCP terminal transmission parameters administered for location
on the Terminal Parameters n screens."
One of the parameters if I recall correctly is the volume option.
So you could be lucky...
 

I may need to clarify the issue a little, I am looking to see if I can adjust the outgoing volume. Callers are reporting they can't hear one of the customer service agents very well. The phone has been replaced, punched down to a new port, and im still having issues.

Thank you both for the info and documentation. I did have those guides and read through it before hand, but never found what I needed. I have review the terminal-parameters, but that seems like a global change. I am worried about making changes at that level since its only one user reporting the issue.
 
try hooking up the phone hanging directly off the digital port and then make the call, if it is ok then you seem to have a wiring issue at the station node end, just a thought.

acss sme acis sme acss cm 5.2.1 acss cm and cmm
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top