Handset Swap

[jules0711]

I'm fairly new to our Meridian 11, and I've just been asked to swap two handsets, a 2006 and a 2616. There will be no swap of TNs or DNs, just a physical swap of the handsets, and I was wondering if the Meridian will pick up the change automatically? Obviously the one extension would gain a lot of features being upgraded to a 2616, and one would lose features.

If it doesn't pick up the change automatically, how would I make the change manually?

Sorry if this is a stupid question, but the only other person that I can ask is on holiday for two weeks.

Thanks in anticipation

Juliette

 

[Johnthephoneguy]

Nothis won't work as simple as you would like. Print out the TN on the existing phone, then out that set, and rebuild it as a 2616. You can do all that in LD 20.

LD 20
Prt

type = tn
enter old tn

out
type=2006
tn= existing tn

then

new
type =2616
tn= same tn you just outted
then follow prompts for DN,CLS and keys
You might also want to print an existing 2616 so you see how it is programmed

 

[johnpoole]

the way i do that is to locate a vacant tn, luvu

OVL000
>ld 20

PT0000
REQ: luvu
TYPE: 2000
TN
TYPE 2000 TN   004 0 06 11  8D  VCE

then do a three way mov, also in 20, mov and then type, then from tn to to tn.. either way it's a little faster then moving jumpers, another choice. btw your moving sets, handsets do not have related software

john poole
bellsouth business
columbia,sc