Hi,
I have a peculier problem concerning the index.html page, conceived in Fireworks 4 and exported into Dreamweaver 4.
Problem Description:
The index.html page on shows up half of the graphics and no popoup menus, when accessed on the local LAN, e.g. 192.168.1.1/index.html or from the web, e.g.
However, on the web server itself, the whole index.html page shows up correctly.
Observations:
1) This web page was not changed and worked perfectly before.
2) There has been a change. The harddrive on the PC, where the webserver is, had to be reformatted. Windows XP and the web server application were re-installed.
3) The root folder and files were put back as in the original state on the web server.
4) On the web server, when is accessed the whole web page, pop-up menus appear.
5) From another PC on the LAN, the web page wouldn't appear. Troubleshooting: Connected the web server and PC via a hub and put fixed ip addresses on each. When the pc accessed the fixed ip address 192.168.1.1/index.html on the web server only half the page shows up and no pop-up menus.
6) The same phenomenon is apparent when accessing from the web.
7) This is the only page which appears to demonstrate this strange behaviour.
8) I've tried re-exporting the fireworks graphics from Fireworks to Dreamweaver but always get the same problem.
Any ideas?????
This one is extremely frustrating as I cannot see what could have caused this problem, given that it was working perfectly beforehand.
Thanks,
jamili
I have a peculier problem concerning the index.html page, conceived in Fireworks 4 and exported into Dreamweaver 4.
Problem Description:
The index.html page on shows up half of the graphics and no popoup menus, when accessed on the local LAN, e.g. 192.168.1.1/index.html or from the web, e.g.
However, on the web server itself, the whole index.html page shows up correctly.
Observations:
1) This web page was not changed and worked perfectly before.
2) There has been a change. The harddrive on the PC, where the webserver is, had to be reformatted. Windows XP and the web server application were re-installed.
3) The root folder and files were put back as in the original state on the web server.
4) On the web server, when is accessed the whole web page, pop-up menus appear.
5) From another PC on the LAN, the web page wouldn't appear. Troubleshooting: Connected the web server and PC via a hub and put fixed ip addresses on each. When the pc accessed the fixed ip address 192.168.1.1/index.html on the web server only half the page shows up and no pop-up menus.
6) The same phenomenon is apparent when accessing from the web.
7) This is the only page which appears to demonstrate this strange behaviour.
8) I've tried re-exporting the fireworks graphics from Fireworks to Dreamweaver but always get the same problem.
Any ideas?????
This one is extremely frustrating as I cannot see what could have caused this problem, given that it was working perfectly beforehand.
Thanks,
jamili