h323 gateway configuration in CME 4.2 2

[sativato]

I am trying to add an h.323 PRI gateway to a Cisco 2821 running CME 4.2 and Unity Express. Can anyone send me a sample config for this, or a link to some sample configs. I feel as if I am close but if you have already done this, please help a CME newbie out.

I have a VWIC2-1MFT-T1/E1 card in the router along with the Unity service module.

Much Thanks

 

[jeter]

!
ip dhcp pool voice
network 192.168.2.0 255.255.255.0
option 150 ip 192.168.2.252
default-router 192.168.2.252
!
!
no ip domain lookup
ip domain name yourdomain.com
!
!
isdn switch-type primary-ni
!
voice-card 0
no dspfarm
!
username cisco privilege 15 secret #$%&$^&%^&*$%&*$*$*$*
!
!
controller T1 0/0/0
framing esf
linecode b8zs
pri-group timeslots 1-24
!
controller T1 0/0/1
framing esf
linecode b8zs
!
!
!
!
!
!
interface GigabitEthernet0/0
description Voice and Data Encapsulation
no ip address
duplex auto
speed auto
!
interface GigabitEthernet0/0.1
description connection to Data Vlan
encapsulation dot1Q 1 native
ip address 192.168.1.252 255.255.255.0
!
interface GigabitEthernet0/0.2
description Connection to Cisco VoIP
encapsulation dot1Q 2
ip address 192.168.2.252 255.255.255.0
!
interface GigabitEthernet0/1
no ip address
shutdown
duplex auto
speed auto
!
interface Serial0/0/0:23
no ip address
encapsulation hdlc
isdn switch-type primary-ni
isdn incoming-voice voice
no cdp enable
!
interface Service-Engine1/0
ip unnumbered GigabitEthernet0/0.2
service-module ip address 192.168.2.100 255.255.255.0
service-module ip default-gateway 192.168.2.252
!
router eigrp 200
network 192.168.1.0
network 192.168.2.0
no auto-summary
!
ip route 192.168.2.100 255.255.255.255 Service-Engine1/0
!
!
ip http server
ip http authentication local
ip http secure-server
ip http timeout-policy idle 60 life 86400 requests 10000
!
!
!
!
!
!
tftp-server flash00307020200.bin
tftp-server flash00307020200.loads
tftp-server flash00307020200.sb2
tftp-server flash00307020200.sbn
tftp-server flash00403020214.bin
tftp-server flash:CP7905060000SCCP050124A.zup
tftp-server flash00305000600.BIN
tftp-server flash:S00104000100.sbn
tftp-server flash:S00103020002.bin
!
control-plane
!
!
!
voice-port 0/0/0:23
!
!
!
!
!
dial-peer voice 1 pots
description Local Dialing
destination-pattern 9[2-9]......
direct-inward-dial
port 0/0/0:23
forward-digits 7
!
dial-peer voice 4999 voip
destination-pattern 5000
translate-outgoing called 1
session protocol sipv2
session target ipv4:192.168.2.100
dtmf-relay sip-notify
codec g711ulaw
no vad
!
dial-peer voice 4998 voip
destination-pattern 409.
session protocol sipv2
session target ipv4:192.168.2.100
dtmf-relay sip-notify
codec g711ulaw
no vad
!
dial-peer voice 2 pots
description Long Distance/Toll Free Dialing
destination-pattern 91[2-9].........
port 0/0/0:23
forward-digits 11
!
dial-peer voice 3 pots
description Emergency Call 911
destination-pattern 911
port 0/0/0:23
forward-digits all
!
dial-peer voice 4 pots
description International Dialing
destination-pattern 9011[2-9]..........
port 0/0/0:23
forward-digits all
!
dial-peer voice 60 pots
description Toll Free Dialing -800
destination-pattern 91800.......
port 0/0/0:23
forward-digits all
!
dial-peer voice 80 pots
description Toll Free Dialing -877
destination-pattern 91877.......
port 0/0/0:23
forward-digits 11
!
dial-peer voice 90 pots
description Toll Free Dialing -888
destination-pattern 91888.......
port 0/0/0:23
forward-digits 11
!
dial-peer voice 91 pots
destination-pattern 9911
port 0/0/0:23
forward-digits 3
!
dial-peer voice 92 pots
destination-pattern 9T
port 0/0/0:23
!
dial-peer voice 5 pots
incoming called-number 7027954800
direct-inward-dial
port 0/0/0:23
!
!
!
!
!
telephony-service
load 7910 P00403020214
load 7960-7940 P00307020200
load 7914 S00103020002
load 7941 term41.default.loads
load 7961 term61.default.loads
max-ephones 40
max-dn 40
ip source-address 192.168.2.252 port 2000
auto assign 1 to 20
system message Fisk Electric
url services

http://192.168.2.100/voiceview/common/login.do

url authentication

http://192.168.2.100/voiceview/authentication/authenticate.do

dialplan-pattern 1 4... extension-length 4
voicemail 5000
max-conferences 8 gain -6
moh music-on-hold.au
dn-webedit
time-webedit
transfer-system full-consult
create cnf-files version-stamp 7960 Mar 30 2007 10:08:12
!
!
ephone-dn 1 dual-line
number 7025554800
name 7025554800
call-forward busy 5800
call-forward noan 5000 timeout 18
!
!
ephone-dn 2 dual-line
number 7025554801
name 7025554801
call-forward busy 5000
call-forward noan 5000 timeout 10
!
!
ephone-dn 3 dual-line
number 7025554802
name 7025554802
call-forward busy 5000
call-forward noan 5000 timeout 18
!
!
ephone-dn 4 dual-line
number 7025554803
name 7025554803
call-forward busy 5000
call-forward noan 5000 timeout 18
!
!
ephone-dn 5 dual-line
number 7025554804
name 7025554804
call-forward busy 5000
call-forward noan 5000 timeout 18
!

!
!
ephone-dn 21
number 5800
!
!
ephone-dn 22 dual-line
number 5801
name 5801
hold-alert 30 originator
!
!
ephone-dn 23
number 5802
name 5802
hold-alert 30 originator
!
!
ephone-dn 24
number 5803
name 5803
hold-alert 30 originator
!
!
ephone-dn 25
number 5804
name 5804
hold-alert 30 originator
!

!
!
ephone-dn 38
number 4000
name IP_Paging
paging ip 239.1.1.1 port 2000
!
!
ephone-dn 39
number 1999....
mwi on
!
!
ephone-dn 40
number 1998....
mwi off
!
!
ephone 1
device-security-mode none
mac-address 0019.305D.84CC
type 7960 addon 1 7914
button 1:1 2:21 7m2 8m3
button 9m4 10m5 11m6 12m7
button 13m8 14m9 15m10 16m11
button 17m12 18m13
!
!
!
ephone 2
device-security-mode none
mac-address 001A.A233.11E3
paging-dn 38
button 1:2 2:22
!
!
!
ephone 3
device-security-mode none
mac-address 0019.30D4.7739
paging-dn 38
button 1:3 2:23
!
!
!
ephone 4
device-security-mode none
mac-address 001A.A231.FE4E
paging-dn 38
button 1:5 2:25
!
!
!
ephone 5
device-security-mode none
mac-address 0019.30C8.EF3C
paging-dn 38
button 1:4 2:24
!
!
!
!
!
line con 0
exec-timeout 30 0
logging synchronous
login local
line aux 0
line 66
no activation-character
no exec
transport preferred none
transport input all
transport output pad telnet rlogin lapb-ta mop udptn v120 ssh
Line vty 0 4
access-class 23 in
privilege level 15
login local
transport input telnet ssh
line vty 5 15
access-class 23 in
privilege level 15
login local
transport input telnet ssh
!
scheduler allocate 20000 1000
!
end




Spc NVARNG
Tek-TIP Member 19,650

 

[ptdog]

Don't forget the card-type command to specify if it is for a T1 or E1.

Then then network-clock-participate command, then the network-clock-select.

 

[jeter]

good call I did paste in the whole config....



Spc NVARNG
Tek-TIP Member 19,650

 

[sativato]

Thanks you guys. Between your two posts, ICT samples, more reading, and a few tears of frustration, I am now connected to the PSTN. The network-clock-participate was the setting preventing me from adding the controller PRI timeslots, apparently necessary to be able to configure Serial ports/channels.

Thanks again.

 

[quazimotto]

Jeter,

Great Post. I am using a CME 3.3. In your config, I noticed you do not use a loopback interface. In CME 4.2, do you use something else to facilitate H.323 to H.323 calls. I have been trying to get a Cisco CME 3.3 to talk to an Avaya IPO 4.1. The IPO side is easy. I can get the IPO to establish a call to the CME. When I call the IPO from the CME I can see that the CME sends a packet to the IPO but no call is established. ANy ideas?

Thank you for any help you can provide.

Quaz

 

[jeter]

Try this!!! I'm not sure if it is what you need..

!
voice service voip
allow-connections h323 to h323
allow-connections h323 to sip
no supplementary-service h450.2
no supplementary-service h450.3
!




Spc NVARNG
Tek-TIP Member 19,650

 

[stevenChina]

Is SIP the mandatory and only protocol for the connection between CME and CUE?
Is h323 or mgcp or other ok?Thanks