H225 issue with Video Confrencing

[Piloria]

H225 message CALL PROCEEDING received from 10.2.2.20/1720 to 10.0.0.10/62122 before SETUP
H225 message RELEASE_COMPLETE received from 10.2.2.20/1720 to 10.0.0.10/62122 before SETUP
(IP's changed)

we are routing between two sites and through two PIX's
one using 6.3.4 the other is 7(not sure version)
the errors are on the 6.3.4

 

[Piloria]

We have teied removing the Fixup on ports 1720
this removes the error but we now get busy signal(on VC kit) when trying the call

 

[brianinms]

You have a site to site VPN?

 

[geranimo666]

Piloria,

Any luck with fixing your video conferencing hurdles. I am running thru a scenario now and have it working. HAven't seen any recent responses from you on this forum so am not sure what the status of your situation is..

Please let me know if I can help. What helped me was applying my video conferencing in a vlan for further monitoring and then reapplied qos.. this helped.. another inquiry here is -what video protocol are you using?

Geranimo