H.323 with AVAYA S8720

[LMKKU]

Does someone have configuration for H.323 (rocai,rodai...) between MX-One TSW with AVAYA S8720 (used CODECS 729 or 723.1 etc.)

I used config below not work
<RODAP:ROU=10;
ROUTE DATA
ROU TYPE VARC VARI VARO FILTER
10 TL65 H'00000001 H'00000001 H'00000000 NO

END

<ROCAP:ROU=10;
ROUTE CATEGORY DATA
ROU SEL TRM SERV NODG DIST DISL TRAF SIG BCAP
10 0110000000000010 4 2110000001 0 30 128 03151515 011110000090 001100

END

<RODDPEST=2867;
EXTERNAL DESTINATION ROUTE DATA
DEST DRN ROU CHO CUST ADC TRC SRT NUMACK PRE
2867 10 100500000000025000000000000 0 1 0

END
This config can't call for bothway.
Can anybody help me ?

Thanks.

 

[TeleLion]

Try this, it might need minor changes

If using IPLU:
RINII:BPOS=1-1-20,GRP=1,IP=xxx.xxx.xxx.xxx,MASK=255.255.255.0,ROUTER=xxx.xxx.xxx.xxx;

NANSI:NUMTYP=ED.NUMSE=12;

ROCAI:ROU=1, SEL=7110000000000010,SERV=3110000001,TRAF=03151515,SIG=011110100091,BCAP=001100;

RODAI:ROU=1,TYPE=TL65,VARI=00000011,VARC=00000011,VARO=00000000;

RIANI:ROU=1,GRP=1,CODEC=0-1-2-3-4-C-B;

RODDIEST=12,ADC=050510000000025010500000000,srt=1,IP=xxx.xxx.xxx.xxx,ROU=1;

ROEQI:ROU=1,TRU=1-1&&1-3;

To MD or not to MD that is the question