h.323 3rd party endpoints ?

[ONEUSER]

thread690-1367251

Hi

I'm trying the use some H.323 softclients, but I have always problems with authentification, even if I don't use a password.

R016x.00.1.510.1

display system-parameters special-applications
(SA8507) - H245 Support With Other Vendors? Y
(SA8697) - 3rd Party H.323 Endpoint Support? Y

display system-parameters customer-options
IP PORT CAPACITIES USED
Max Concur Registered Unauthenticated H.323 Stations: 100

15:26:24 TRACE STARTED 10/07/2011 CM Release String cold-00.1.510.1-19220
15:28:07 rcv GRQ ext 399
endpt [10.100.20.163]:5061
switch [10.100.20.243]:1719
15:28:07 snd GCF ext 399
endpt [10.100.20.163]:5061
switch [10.100.20.243]:1719
15:28:07 rcv RRQ ext 399
endpt [10.100.20.163]:5061
switch [10.100.20.243]:1719
15:28:07 denial event 1926: IP RRJ-Authenticatn fail
endpt 10.100.20.163 data0:0x8c7f
15:28:07 snd RRJ ext 399
endpt [10.100.20.163]:5061
switch [10.100.20.243]:1719
15:29:07 rcv RRQ ext 399
endpt [10.100.20.163]:5061
switch [10.100.20.243]:1719
15:29:07 denial event 1924: IP RRJ-No GRQ msg rcvd
endpt 10.100.20.163 data0:0x8c7f
15:29:07 snd RRJ ext 399
endpt [10.100.20.163]:5061
switch [10.100.20.243]:1719


any suggestions ?

Thanks !!

 

[Yemine]

I have the same problem?

Any suggestions please.

http://tirustbuy.com/godaddy

 

[PBXHowTo]

First thing that comes to mind is firewall. (Edge and local PC) - I know, obvious but it is always worth asking if anything smallis being blocked.

The official description of that denial is:
Denial 1924: Registration rejected because no Gatekeeper Request message was received or RRQ was received more than 15 seconds after GRQ

So, the station you setup on the PBX, did you give it a password or did you leave it blank? Try giving it a password if blank.