Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Gwia has very high TCP/IP read errors
- Thread starter Breezeman
- Start date
salserocito
MIS
What version of NetWare, GroupWise and associated Support Packs are you running?
What is your Minimum and Maximum Packet Receive Buffers set for?
If you look under LAN/WAN Statistics, select Ethernet_II and look for NO ECB Count Available... What is the number compared to Total Packets Sent and Received?
What is your TCPIP Default Route... Is this address the most direct route?
Please advise.
What is your Minimum and Maximum Packet Receive Buffers set for?
If you look under LAN/WAN Statistics, select Ethernet_II and look for NO ECB Count Available... What is the number compared to Total Packets Sent and Received?
What is your TCPIP Default Route... Is this address the most direct route?
Please advise.
TheBoySmith
Technical User
have a look at gwia/smtp/send and receive threads. Set them to 29 at least. Default is 2 and 4. Lee Smith
Associated Network Services
Snr Systems Engineer
Lee.Smith@ANSPLC.Com
Associated Network Services
Snr Systems Engineer
Lee.Smith@ANSPLC.Com
- Status
Similar threads
- Locked
- Question
- Locked
- Question