GW5.5.5.2 client problems after upgrade to gw55ep3am 1

[Breezeman]

When SSD is patched, the new version of the client loads fine. Then you cannot print some messages and cannot view properties of messages. Recieve error: SCCVW.DLL "The specified procedure could not be found."

 

[sobak]

This is the only information that I could find on this. Take a look at it and see if maybe it will solve your issue.

http://support.novell.com/cgi-bin/search/searchtid.cgi?/10058875.htm

david e
*end users are just like computers, some you can work with...others just need a simple reBOOTing to fix their problems.*

 

[Breezeman]

I have read this tid and it really doesn't apply wrong versions. Thanks for taking the time to research it.

 

[sobak]

Hey Breezeman, sorry I couldn't be of any more help. Let us know what you find out maybe someone else will have the same question later.....

david e
*end users are just like computers, some you can work with...others just need a simple reBOOTing to fix their problems.*

 

[Breezeman]

The problem apparently (as there is no defined cause at this point) is in a previous upgrade from 5.2 to 5.5 was run from an english only version of the 5.5 cd. The 5.5 enhancement pack that was loaded is the multilanguage version, and all subsenquent patchs have been multi. This is most likely the cause as the error seems to have to do with views and language. The fix we are deploying is not to use the client from the g55ep3am patch. Hopefully the ramafications of leaving it until we upgrade to 6.0 are being looked at. Any comments are welcomed. Breeze

 

[rmccrea]

Take a look at document number 2960917 on Novell's web site.
Had same problem with printing internal mail only. This patch fixed it. Good Luck.

 

[Breezeman]

Thanks alot. Worked great. Deploys Client 5.5.6.1 and seems to work well.