Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations John Tel on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

GUIDES/GRIDS WON'T SHOW UP 1

Status
Not open for further replies.

GREEN1

Technical User
Dec 8, 2002
3
US
PLEASE PLEASE PLEASE.

Is my document krupt or am i missing something?

i cannot get my grids or my guides to turn on. they dissapeared sometime while i was working - could have been a mistaken key command or ??? might have been while switching views.

Thanks heaps.
CG
 
Have you tried going to View in the top menu bar and from the drop down options selecting Show Guides/Show Document Grid?
 
yes, i've tried that.

the guides will not turn on. nor will the grid, when i try to whether with key commands or in the drop downs. it only happens in this one file. that's why i wonder.

thanks CG
 
Check the bottom of your toolbar...you're probably in Preview mode...to see your grids and guides, switch back to Normal mode. Preview doesn't display anything that won't print.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top