GUI Problem Netscreen 100

[jamesjames1]

I have a problemwith my netscreen 100 firewall. Its a hub firewall running quite a few VPNs to other companies.
While I was adding a new user via the the web GUI it timed out and now I cant log in at all. It seems the web interface has stopped working. I read somewhere that I might have max'd the 30 login sessions available.

Is there a way to reset the logins orget logged in some how. I would rather not reboot but will if I have to.

If I do reboot with all the VPNS come back up or will there be more problems....

Cheers

james

 

[aco636]

Hi there

Not sure how to clear the users, the VPNs will come back up if there is traffic to and/or from remote locations or as soon as there is.
You might try CLI from console or telnet. I have one firewall that frequently locks up the GUI.

However, in my case it does come back. My get our of jail card is usually reset from the console/telnet. Also you can do far more from the command line once you get used to the language.
Any changes must be followed by the save command.
Hope this helps - good luck
regards ACO