gameoflife
IS-IT--Management
has anyone used the gui interface for ipx office, we are new to tadiran and hope it is going to be a helpful tool for programming
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations IamaSherpa on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
gui interfac 2
- Thread starter gameoflife
- Start date
- Status
-
1
- #2
metballnut
Vendor
Yes I have....The CVD program works well, but procom is easier. I did create a scaled down doc for training....
- Thread starter
- #3
gameoflife
IS-IT--Management
thanks for advice
i would be grateful for any docs or downloads available
i would be grateful for any docs or downloads available
-
1
- #4
disturbedone
Vendor
CVD and CVA are really to be used by the customer, not the tech. As metballnut said, Procomm is a lot easier and much, much quicker.
If you ask for support from Tadiran (US, Israel or anywhere else) they will ask you lots of things from the PI as they don't use CVD either. Command line gives you access to much more. If you want to use it, feel free but you should be more proficient in command line.
CVD has it's goos points eg ability to swap xtns, but it's slow. Once you know what you're doing it's much much quicker to do it by command line.
If you ask for support from Tadiran (US, Israel or anywhere else) they will ask you lots of things from the PI as they don't use CVD either. Command line gives you access to much more. If you want to use it, feel free but you should be more proficient in command line.
CVD has it's goos points eg ability to swap xtns, but it's slow. Once you know what you're doing it's much much quicker to do it by command line.
- Status