gui and Asterisk 1

[damocles13]

Hello All, I just installed Asterisk Now and cant seem to get the GUI running. Any advise would be greatly appreciated.

They mostly come at night, mostly

 

[busster]

When you browse to the IP address of the unit, you get no GUI?

 

[disturbedone]

I just installed on Ubuntu 9.04 and found a problem that stops the GUI from running. Although it creates the /usr/share/asterisk directory it doesn't create the index.html file. Run these commands and restart Asterisk and see how it goes. This may not apply if you're not running Ubuntu.

rm -rf /usr/share/asterisk/static-http/
ln -s /var/lib/asterisk/static-http/ /usr/share/asterisk/
/etc/init.d/asterisk restart

While I'm here, does anyone know how to enable web access from a machine other than the localhost??? I can connect from the Ubuntu machine using

http://localhost:8088/asterisk/static/config/index.html

but not from another machine using

http://192.168.1.10/asterisk/static/config/index.html

- I get 'Failed to connect'. The manager.conf file has 'port=5038' and 'bindaddr=127.0.0.1' so I changed the bindaddr and restarted but no luck. The port=5038 is odd as I'm connecting on 8088 but changing it also has not effect.

Any ideas?

Thx

 

[busster]

Leave the port set to 5038 in manager.
Set bindaddr= 0.0.0.0 in both http.conf and manager.conf