Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Guest account

Status
Not open for further replies.

zoomer01

Technical User
Nov 24, 2004
9
CA
Hi:

I am running two win xp pro OSs linked via a hub. System A is able to access all resources of system B, but system B cannot access A's resources - at all.

These system both have accounts for accessing each other; however, from B, when i try to access A, i get the following:

username: SystemB\guest
password:

However: the username is grayed out so i cannot enter any other info.

Can someone offer a solution? It would be appreciated.

Chad
 
Add as new users to Computer A the usernames and passwords of Computer B.

Add as new users to Computer B the usernames and passwords of Computer A.

Check on both machines under Internet Protocol (TCP/IP), Properties, Advanced, WINS tab that 'enable Netbios over TCP/IP' is checked.

Make sure the Workgroup name is identical on both machines. Do not give the computer name the same name as any user of that machine.
 
Several other notes:

. be certain there are no firewall issues
. no blank or empty passwords
. share something: drive, folder, printer, but something from all workstations
. do an ipconfig /all from both workstations. The Node Type should show as not defined, broadcast or hybrid. If it shows as peer-to-peer:

Open notepad and copy/paste the below. Save as node_fix.reg :

**** start copy/paste below this line
REGEDIT4

[-HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Netbt\Parameters\NodeType]

[HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Netbt\Parameters]
"NodeType"=dword:00000001

[-HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Netbt\Parameters\DhcpNodeType]

****** end copy/paste above this line

Double click the saved node_fix.reg file to merge the registry change. Reboot and test.

 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top