Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations IamaSherpa on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

GRTD Reinstall / Backup

Status
Not open for further replies.

Sympology

MIS
Jan 6, 2004
5,508
GB
Reinstall:
I've found if you install a fresh copy of GRTD to a fresh machine, back the entire GRTD folder up to a sever before any data is entered. Then if you have a problem with a pc and the below fails to fix it, dump this blank copy down. I'd say it fixes about 70% of issues.

A little trick I've found is to back up the *.mdb files to a remote location for each pc. Then if it corrupts, just dump it back down. Alternativly, copy the whole GRTD folder to a seprate location and dump this back down when required.

Stu..

2 decades from retirement, 2 minutes from a breakdown
 
You are right, when you copy the *.mdb files it will save your setup's. One thing you can set via ODCB is the Agents List when using a standalone GRTD.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top