Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations gkittelson on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Group Application Record ID - license sharing

Status
Not open for further replies.

danramirez

Programmer
Oct 25, 2009
1,136
ES
Guys, is it required an additional part number to share licenses between MCDs? Or is this something that you configure?

Have you guys donde this before, any document on MOL?

The MCD5.0 update course don't say much about it

Regards,

Daniel

 
Yes we have done. There is a DLM PN that needs to be ordered (and I dont think its free). We have only done one so i will check what we ordered shortly and post
 
hey dan, I believe the part number is 54005330 and it is not free.
 
Things to watchout for: DLM Arid and all other ARID's must have the same SWAS time on there products to be joined in to a Garid. After you've done this at the AMC you must SYNC your systems via the Voice Networking page.
 
Agreed the SWA of each 3300 needs to be alligned so all expire at once. Also the DLM needs internet access which may not be the case at all customers.

I'd tell you a UDP joke but I'm afraid you won't get it. TCP jokes are the best because you always get them.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top