Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Greyscale Images
- Thread starter herur
- Start date
GeorgeMack
Technical User
I'm not sure which version of Quark 4 you are using; mine, version 4.11, will (technically) allow a none-backgound.
HOWEVER that means that only a pure white will drop out, and a jagged grey margin appears around objects if they have any non-white border at all (as most do).
Two solutions I've used:
1) send the image to the back, with a white background (and put things that "show through" the background on top) and
2) use a clipping path from Photoshop to isolate the object.
Hope this helps
HOWEVER that means that only a pure white will drop out, and a jagged grey margin appears around objects if they have any non-white border at all (as most do).
Two solutions I've used:
1) send the image to the back, with a white background (and put things that "show through" the background on top) and
2) use a clipping path from Photoshop to isolate the object.
Hope this helps
- Status
Similar threads
