Green Programmer needs help with Call Forwarding 1

[mmolzan]

I'm trying to set up my call forwarding on a Norstar CICS 4 x 8 on a T7316 phone. I want to be able to press "Call FWD" on the phone and have calls received on line 2 to be forwarded after 4 rings to my cell phone. Is this possible? Is there a section that walks you through this process?
Thanks so much in advance.

 

[bkrike]

It is not possible by pressing "Call FWD", as that causes the action to take place immediately. As to call fowarding:

Read FAQ....

http://www.tek-tips.com/faqs.cfm?spid=799&sfid=2078&newpid=799

 

[mmolzan]

I went to the FAQ's and started to build a route and got to route:001 then show, then dialout: No number leave alone-Next, then I have a pool choice, do I use Pool A? If I select next after pool A it says "end of list". There is no choice for DN type.

After that I thought I built a route and followed through to dest codes and show, when I add dest code what should I enter? I tried to enter "66" and Add, then I tried to change route to 001 (the route I built).

After this it doesn't work. I'm asuming I'm not entering the destination code in correctly? I think I'm getting close. Thanks.