Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Gre through pix 515

Status
Not open for further replies.
kv123

kv123

IS-IT--Management
Jul 1, 2003
21
HR
Hi,

I have a PIX515E, 5.3(2). I applied access-lists to permit only gre
protocol between two stations (one from LAN, one from DMZ int) and it's not
working, but when I allow only ip traffic it's working. There is no NAT from
LAN to DMZ.

The same access-lists I applied on Cisco router and they were working, gre
was passing, so everything was the same, except instead of pix I had router.
Is there something else I must do on PIX? Or maybe upgrade to newer version?
Any help is appreciated very much...

Thanks,
Ivana
 
Status
Not open for further replies.

Similar threads

bfordz
  • Locked
  • Question
new help on setting up third party VoIP phones through Catalyst 2960x switch
Replies
0
Views
101
bfordz
bfordz
steel_bender
  • Locked
  • Question
Allow HTTPS TCP Traffic through ASA5525
Replies
1
Views
109
Mogles49
Mogles49
brownmab53
  • Locked
  • Question
Cisco PIX 525 is not allowing DHCP address to be applied to router
Replies
1
Views
90
iggsterman
iggsterman
hall5942
  • Locked
  • Question
Site to Site VPN with Cisco 881 and PIX
Replies
0
Views
54
hall5942
hall5942
levelistic
  • Locked
  • Question
Cisco Pix 506e Firewall/Router
Replies
2
Views
48
burtsbees
burtsbees

Part and Inventory Search

Sponsor

Back
Top