Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Grandstream with MiVB

Status
Not open for further replies.

AlphaMann

Technical User
Nov 16, 2012
289
CA
Anyone out there play much with Grandstreams on a 3300?
I have been playing around. Any tricks or setting would be appreciated.

One question I have is while I believe the guide says that DSS/BLF are not really supported on generic sip devices had anyone been able to figure this out?
The old 5550 software and MiCollab monitor extension state, so that leaves me to believe that there may be a way to monitor extension status from a 3rd party device.

Thanks,
 
We've been using them for years, the HT-502 & 503 required 3 settings and was live, the 16, 24, 48 ports have a little bit more of a set up, but for generic analog, they work great, the hospitality deployments can require some tweaking regarding MWI, both locations had 3rd party VM, but other than that we've had no issues.

As I reread your post you are probably referring to the phones and not ATA's , I apologize.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top