Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Grandstream 3rd party SIP on 9100

Status
Not open for further replies.

conxtel

Technical User
May 12, 2014
130
CA
Has anybody used the Grandstream DP750 base with the DP720 handset on the 9100?

I cannot seem to get it to register. I left the SIP registrar port default at 5070 and assigned a personal index in 15-05-27 and entered a user ID and password in 84-22 but the unit will not register.

I have one NEC IP phone and it came up without issue and I have two 5111 licenses, one active, one available. Not sure where I am going wrong.


 
I have a few grandstream WP825 WiFi phones (not IP DECT) running on a 9100 CP10. I went the easy approach to get this done.

PC Pro, Filter Options, IP Phones, Tick box for Port to be turned into IP Phone
15-05 - 16 - Set Auth Password, 18 - IP Duplication Allowed on

In Phone, set ServerIP as PBX IP:5070, username as extension, password as 15-05-16

All being good and right in the world, this should just work.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top