Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

GPT ISDX-S Programming Commands 1

Status
Not open for further replies.

TyphooStew

Technical User
Nov 17, 2006
5
GB
I recently took over admin of our GPT ISDX-S PBX phone system.

Can anyone point me in the direction of available commands and how to use them please?

I'm looking to be able to wire phone points in and then make them live etc.

I have a very basic list of commands at the moment such as,

LEX, LIVU, RIVU, RPG, LPG, IEX, STAC,

but would like to extend my knowledge further as I'm looking at cutting costs to the company by not requiring outside help for the system.

Also, is using TELNET the best way to use the system? Are there other ways?

Here is what I'm presented with when I TELNET onto the system:

TELNET MMI on ACI System (10.20.36.40)
Unpublished work. Copyright Siemens GEC Communications Systems Limited.

Unpublished work. Copyright Siemens GEC Communications Systems Limited.
DX KCSCL9719 25840.01 01.025
6.1.202 0001000 UK 12 01/11/99 A C 000
17/11/06 16:42:17

OSL, PLEASE.
?

This is the model details inside the cabinet:

GPT ISDX-S
Code: 871/1/13110/013
S/N: 8251
GEC PLESSEY



Any help will be greatly appreciated. Thanks.
 
Are you UK based?
I use Hyperterminal, a bit basic but its free!!
May well have a copy of the cd with all the commands on.
 
Yes, I'm in the UK.

Anything must be better than Telneting onto the system!

A copy of the commands would be great. I have a listing with me, but no explanation or examples of what they do and how they are used.

I'm basically starting frm scratch trying to learn the system and its current configuration.

You want to see the various DP's scattered around the factory. Not one of them has any markings as to what connection is for what!

I ordered myself a tone generator recently, that should be fun!

Thanks in advance for any help you can give.
 
I have a copy of the 6.1, 6.2 & 6.3 eps but the install file is 80mb so I won't be able to email. Create a temp email address post it and I'll send a link to our ftp site where I'll upload it. Once you have downloaded it cancel your email or you'll get loads of spam after posting it here.

When I was born I was so suprised I didn't talk for 18 months
 
I have a copy of rel 8 which i could post out to you if its any help, as biglebowski says if you post a temp email address on here I will email you and get a home/work address from you.
 
Thanks.

Can you send info to thevxfan (at) blueyonder (dot) co (dot) uk please?
 
just got a copy of rls 9.0

Remember if it doesn't work hit it harder

Scott UK
 
I d/l'ed the ep 6.1/2/3 this morning. Thanks very much biglebowski!

The info in there is great and helps alot.


I have a new question now....

I have heard that there is software available for the administration of the system. Can someone point me in the right direction please?
 
dont bother using 3rd party admin software, try using a simple term app like procom

Remember if it doesn't work hit it harder

Scott UK
 
Any ideas where i could find a copy of the Rel 8 CD? I am also UK based.

thanks in advance,

Gary
 
If anyone has th eCD then i would be interested. We were supposed to have been issued with one when we went to rev 8, but never received it, and have been asking Siemens for it for a year now to no effect.
Regards
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top