GPF ERROR lock ups

[terryjade]

i keep getting gpf and fatal exception errors (i installed tweek ui and got a report which i have enclosed snd 801.drv (sound card) i believe this is the sole of the problem But with in the blue screen off death page it will flick to another blue screen and display fatal exception OD 30ff:000026f8 then to another page exception od 0028:coo5a1a3 in vxd vtdapi (01) then to another page 0028c182b570 in vxd voltrack (4)... and an exception in vmouse…. i must admit though i could'nt write the whole message out as my computer changes screen before i can finish this is what is in my pc...i have done fdisk format cleen install i admit this is not the answer but ...

help please terry....

gigabyte ga-71xe4 system board
128mb ram
genius soundmaker 32x2
intel ham data fax voice 56k
creative riva tnt2 m64

IRQ
0 System timer
1 Standard 101/102-Key or Microsoft Natural Keyboard
2 Programmable interrupt controller
3 Communications Port (COM2)
4 Communications Port (COM1)
5 Genius SM32X2 Legacy Audio
6 Standard Floppy Disk Controller
7 ECP Printer Port (LPT1)
8 System CMOS/real time clock
9 AMD 756 PCI to USB Open Host Controller
9 ACPI IRQ Holder for PCI IRQ Steering
10 Genius SM32X2 PCI Audio
10 Intel HaM Data Fax Voice
10 ACPI IRQ Holder for PCI IRQ Steering
11 Creative CT6984
11 ACPI IRQ Holder for PCI IRQ Steering
11 SCI IRQ used by ACPI bus
12 Microsoft PS/2 Port Mouse
13 Numeric data processor
14 Primary Bus Master IDE controller
14 AMD-756 Bus Master IDE Controller V1.32
15 Secondary Bus Master IDE controller
15 AMD-756 Bus Master IDE Controller V1.32

(from tweek ui - FAULTLOG)

**********************************************************************
Date 11/06/2001 Time 20:59
IEXPLORE caused a general protection fault
in module SND801.DRV at 0001:000026f8.
Registers:
EAX=00000000 CS=30ff EIP=000026f8 EFLGS=00000212
EBX=318f000c SS=5bff ESP=00000f54 EBP=00000f56
ECX=00000ac4 DS=30bf ESI=00003cb0 FS=2a07
EDX=65900000 ES=03e3 EDI=00001588 GS=0efe
Bytes at CS:EIP:
f3 ab 12 c9 f3 aa 5f 8b e5 5d ca 08 00 00 55 8b
Stack dump:
0f645622 30ff0123 15880000 03e31588 08070fa4 000030ff 00000000 15880000 03e31588 00000082 56223cb0 00000000 00000fcc 0fcd0000 00004390 00000000
**********************************************************************
Date 11/06/2001 Time 22:24
IEXPLORE caused a general protection fault
in module SND801.DRV at 0001:000026f8.
Registers:
EAX=00000000 CS=3077 EIP=000026f8 EFLGS=00000212
EBX=3107000c SS=296f ESP=00000f54 EBP=00000f56
ECX=00000ac4 DS=3037 ESI=00003cb0 FS=192f
EDX=15840000 ES=032b EDI=00001588 GS=189e
Bytes at CS:EIP:
f3 ab 12 c9 f3 aa 5f 8b e5 5d ca 08 00 00 55 8b
Stack dump:
0f643ff0 30770123 15880000 032b1588 08070fa4 00003077 00000000 15880000 032b1588 00000082 3ff03cb0 00000000 00000fcc 0fcd0000 00004390 03670000
**********************************************************************
Date 11/07/2001 Time 01:38
MMTASK caused a general protection fault
in module SND801.DRV at 0001:000026f8.
Registers:
EAX=00000000 CS=311f EIP=000026f8 EFLGS=00000212
EBX=cf21000c SS=4b8f ESP=00000f54 EBP=80a80f56
ECX=00000ac4 DS=30df ESI=00003cb0 FS=0187
EDX=fe800000 ES=0203 EDI=00001588 GS=0000
Bytes at CS:EIP:
f3 ab 12 c9 f3 aa 5f 8b e5 5d ca 08 00 00 55 8b
Stack dump:
0f643cb0 311f0123 15880000 02031588 08070fa4 0000311f 00000000 15880000 02031588 00000082 3cb03cb0 00000000 00000000 00000000 00000000 00000000

 

[ramani]

Hi
A suggestion to get into BIOS and
1. do a RESET of the BIOS to SETUP default.
2. disable COM2 (assuming you are not using that).

Then restart. Are you having some SCSI card, or external devices using SCSI card. I think your SCSI configuration is clashing with Sound card addresses. AT least for checking purpose, in Windows..system devices.. you can disable the SCSI configuration and check by working... OR. disable the sound card and try working.

YOu will get the answer by the results...
ramani :-9
(Subramanian.G),FoxAcc, ramani_g@yahoo.com