Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Goip sip gateway to Bcm 50 rls6

Status
Not open for further replies.

akak247

Programmer
May 8, 2011
19
KE
Hi,

I am having trouble connecting goip sip gsm gateway to bcm 50.
The sip trunk will not come up.
Any suggestions.
Thanks.

 
Perhaps you could provide more info on your setup and what you have done or tried any any screen shots.

What is the purpose to install aa Goip for your particular case? no land line service in the mine field?
Do you know that it will work on a BCM50?
It would appear to my that a Goip provides the telephone line via Cell SIM cards and that the PBX is supposed to act as a SIP provider to which the Goip will register too?
If so then the BCM50 or another BCM model will not do this, BCM's connect to SIP providers via SIP Trunking, is that not what the Goip is trying to do?

So I think what you have is two males when you need a male and a female.
That means a newer voip PBX system.

Let us know.










small-logo-sig.png


=----(((((((((()----=
Toronto, Canada

Add me to LinkedIN
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top