GJLSP

[642234]

Hi Guys,

I have MD 110 BC12 SP7. having problem with LIM=6. I have two PCM link with LIM=6. One link was giving problem with one PCM link I changed E-1 from Micro wave and it is free now but when I gave this command GJLCP:LIM=6; its shows both link. When i gave this command GJTSP:LIM=6; its shows both link but when I gave GJLSP:LIM=6;its show only one link with GSMULT=0-17 but no with GSMULT=0-12. when i try to gave this command GJBLI:GSMULT=0-12,GSSIDE =0; it come NO ANSWER FROM GAR .Please advise if some body can help in this regard.

Please find below status of commands.
GJLCP:LIM=6;
GROUP JUNCTOR LINE CONNECTION DATA
EQU GS MULT NO GS CON LIM
6-1-00-0 0-17 1
6-0-00-0 0-12 1

END

<GJTSP:LIM=6;
GROUP JUNCTOR LINE TIME SLOT STATUS
64 CHANNELS INITIATED
SOURCE DESTINATION TRAFFIC CONNECTION TYPE TSCL
EQU EQU
6-0-00-0 NOT USED SYNC CHANNEL ---- ----
6-0-00-1 FREE OK LBDV C321
6-0-00-2 FREE OK LBDV C321
6-0-00-3 FREE OK LBDV C321
6-0-00-4 FREE OK LBDV C321
6-0-00-5 FREE OK LBDV C321
6-0-00-6 FREE OK LBDV C321
6-0-00-7 FREE OK LBDV C321
6-0-00-8 FREE OK LBDV C321
6-0-00-9 FREE OK LBDV C321
6-0-00-10 FREE OK LBDV C321
6-0-00-11 FREE OK LBDV C321
6-0-00-12 FREE OK LBDV C321
6-0-00-13 FREE OK LBDV C321
6-0-00-14 FREE OK LBDV C321
6-0-00-15 10-1-00-11 BUSY OK V LBDV C321
6-0-00-16 NOT USED SIGNAL CHANNEL ---- ----
6-0-00-17 2-0-00-15 BUSY OK V LBDV C321
6-0-00-18 FREE OK LBDV C321
6-0-00-19 2-0-00-20 BUSY OK V LBDV C321
6-0-00-20 FREE OK LBDV C321
6-0-00-21 FREE OK LBDV C321
6-0-00-22 FREE OK LBDV C321
6-0-00-23 FREE OK LBDV C321
6-0-00-24 FREE OK LBDV C321
6-0-00-25 FREE OK LBDV C321
6-0-00-26 FREE OK LBDV C321
6-0-00-27 FREE OK LBDV C321
6-0-00-28 FREE OK LBDV C321
6-0-00-29 FREE OK LBDV C321
6-0-00-30 FREE OK LBDV C321
6-0-00-31 FREE OK LBDV C321
6-1-00-0 NOT USED SYNC CHANNEL ---- ----
6-1-00-1 FREE OK LBDV C321
6-1-00-2 FREE OK LBDV C321
6-1-00-3 FREE OK LBDV C321
6-1-00-4 FREE OK LBDV C321
6-1-00-5 FREE OK LBDV C321
6-1-00-6 FREE OK LBDV C321
6-1-00-7 FREE OK LBDV C321
6-1-00-8 FREE OK LBDV C321
6-1-00-9 FREE OK LBDV C321
6-1-00-10 FREE OK LBDV C321
6-1-00-11 FREE OK LBDV C321
6-1-00-12 FREE OK LBDV C321
6-1-00-13 FREE OK LBDV C321
6-1-00-14 FREE OK LBDV C321
6-1-00-15 FREE OK LBDV C321
6-1-00-16 NOT USED SIGNAL CHANNEL ---- ----
6-1-00-17 FREE OK LBDV C321
6-1-00-18 FREE OK LBDV C321
6-1-00-19 2-1-00-28 BUSY OK V LBDV C321
6-1-00-20 FREE OK LBDV C321
6-1-00-21 FREE OK LBDV C321
6-1-00-22 FREE OK LBDV C321
6-1-00-23 FREE OK LBDV C321
6-1-00-24 FREE OK LBDV C321
6-1-00-25 FREE OK LBDV C321
6-1-00-26 FREE OK LBDV C321
6-1-00-27 FREE OK LBDV C321
6-1-00-28 FREE OK LBDV C321
6-1-00-29 FREE OK LBDV C321
6-1-00-30 FREE OK LBDV C321
6-1-00-31 FREE OK LBDV C321

END

<GJLSP:LIM=6;
GROUP JUNCTOR LINE STATUS
EQU = 6-1-00-0 GS-MULT 0-17
GS SIDE 0 ACTIVE ACTIVATED SIGNALLING SYNC RECEIVING
SIDE 0 ALARM 0000 0000 0000 0000 GSMINPUT 11111110



END

<GJBLI:GSMULT=0-12,GSSIDE=0;

NOT ACCEPTED
NO ANSWER FROM GAR

 

[642234]

Hi Guys,
Need advise on this issue

 

[dstrang1]

What do you get if you send GJLSPRINT=FAULTY; ?
or GJLSP:GSMULT=0-12; ?

Try this:

Clear your faulty signals (HIREI and then send the GJBLI command.

Once you get "NO ANSWER FORM GAR", send HIMDP and see if any signals are generated (if any) for LIM 1 and LIM 6 that might relate to the problem.

You may just have to restart a program unit -- likely in LIM 1.

Of course you've given no detail regarding this statement: "One link was giving problem with one PCM link I changed E-1 from Micro wave and it is free now " and what you actually did......

Good luck,

Dave Strang

 

[642234]

Hi Dave,

I have 15 LIM system . Link remain down for with LIM=6 , GSMULT=0-12 for 5 days . I was not here i came back and changed the E-1 of Micro wave bcoz Micro wave link was faulty.after changing E-1 lines comes free but facing this problem now.i put HIREI and HIMDP.But still same thing.Please advise. also restart programm units GAR in LIM =1 AND LIM=6;

<GJLSP:GSMULT=0-12;
GROUP JUNCTOR LINE STATUS
EQU =127-
BREAK DURING PRINTOUT

 

[642234]

<GJBLI:GSMULT=0-12,GSSIDE=0;

NOT ACCEPTED
NO ANSWER FROM GAR
<HIMDP;

DIAGNOSTICS FROM OPERATING SYSTEM
TIME DATE
10:35:17 10MAY09
DIAGNOSTICS FROM LIM 001, LAST HIREI: 10:34:24 10MAY09

TIME DATE ERROR CODE
10:34:43 10MAY09 H'34
RECEIVING LIM ADDRESS NOT AVAILABLE
LOGICAL PROGRAM ERROR ADDRESS = 020068AC
ENTER
SWSW B-LEVEL SIGNAL BLOCKGJL (H'001C)
FROM SAH (H'069) EXE A IN LIM 001
TO GAM (H'068) EXE A IN LIM 001
NUMBER OF DATA BYTES IN SIGNAL = 11
WITH 0 1 2 3 4 5 6 7 8 9
000 0C 00 00 01 08 57 00 00 00 00
010 00

SEND
SWSW B-LEVEL SIGNAL BLOCKING (H'0071)
FROM GAM (H'068) EXE A IN LIM 001
TO GAR (H'06A) EXE A IN LIM 127
NUMBER OF DATA BYTES IN SIGNAL = 4
WITH 0 1 2 3 4 5 6 7 8 9
000 07 00 00 07

NO INFORMATION STORED IN LIM 002, LAST HIREI: 10:34:24 10MAY09
NO INFORMATION STORED IN LIM 003, LAST HIREI: 10:34:24 10MAY09
NO INFORMATION STORED IN LIM 004, LAST HIREI: 10:34:24 10MAY09
NO INFORMATION STORED IN LIM 005, LAST HIREI: 10:34:24 10MAY09
NO INFORMATION STORED IN LIM 006, LAST HIREI: 10:34:24 10MAY09
NO INFORMATION STORED IN LIM 007, LAST HIREI: 10:34:24 10MAY09
NO INFORMATION STORED IN LIM 008, LAST HIREI: 10:34:25 10MAY09
NO INFORMATION STORED IN LIM 009, LAST HIREI: 10:34:24 10MAY09
NO INFORMATION STORED IN LIM 010, LAST HIREI: 10:34:25 10MAY09
NO INFORMATION STORED IN LIM 011, LAST HIREI: 10:34:25 10MAY09
NO INFORMATION STORED IN LIM 012, LAST HIREI: 10:34:25 10MAY09
NO INFORMATION STORED IN LIM 013, LAST HIREI: 10:34:25 10MAY09
NO INFORMATION STORED IN LIM 014, LAST HIREI: 10:34:24 10MAY09
NO INFORMATION STORED IN LIM 015, LAST HIREI: 10:34:25 10MAY09

END

 

[642234]

Hi Guys,

Need help in above mentioned problem

Thanks

 

[642234]

Hi Guys,

Please advise if some body can help in this problem.

<GJBLI:GSMULT=0-12,GSSIDE=0;

NOT ACCEPTED
NO ANSWER FROM GAR
<HIMDP;

DIAGNOSTICS FROM OPERATING SYSTEM
TIME DATE
10:35:17 10MAY09
DIAGNOSTICS FROM LIM 001, LAST HIREI: 10:34:24 10MAY09

TIME DATE ERROR CODE
10:34:43 10MAY09 H'34
RECEIVING LIM ADDRESS NOT AVAILABLE
LOGICAL PROGRAM ERROR ADDRESS = 020068AC
ENTER
SWSW B-LEVEL SIGNAL BLOCKGJL (H'001C)
FROM SAH (H'069) EXE A IN LIM 001
TO GAM (H'068) EXE A IN LIM 001
NUMBER OF DATA BYTES IN SIGNAL = 11
WITH 0 1 2 3 4 5 6 7 8 9
000 0C 00 00 01 08 57 00 00 00 00
010 00

SEND
SWSW B-LEVEL SIGNAL BLOCKING (H'0071)
FROM GAM (H'068) EXE A IN LIM 001
TO GAR (H'06A) EXE A IN LIM 127
NUMBER OF DATA BYTES IN SIGNAL = 4
WITH 0 1 2 3 4 5 6 7 8 9
000 07 00 00 07

NO INFORMATION STORED IN LIM 002, LAST HIREI: 10:34:24 10MAY09
NO INFORMATION STORED IN LIM 003, LAST HIREI: 10:34:24 10MAY09
NO INFORMATION STORED IN LIM 004, LAST HIREI: 10:34:24 10MAY09
NO INFORMATION STORED IN LIM 005, LAST HIREI: 10:34:24 10MAY09
NO INFORMATION STORED IN LIM 006, LAST HIREI: 10:34:24 10MAY09
NO INFORMATION STORED IN LIM 007, LAST HIREI: 10:34:24 10MAY09
NO INFORMATION STORED IN LIM 008, LAST HIREI: 10:34:25 10MAY09
NO INFORMATION STORED IN LIM 009, LAST HIREI: 10:34:24 10MAY09
NO INFORMATION STORED IN LIM 010, LAST HIREI: 10:34:25 10MAY09
NO INFORMATION STORED IN LIM 011, LAST HIREI: 10:34:25 10MAY09
NO INFORMATION STORED IN LIM 012, LAST HIREI: 10:34:25 10MAY09
NO INFORMATION STORED IN LIM 013, LAST HIREI: 10:34:25 10MAY09
NO INFORMATION STORED IN LIM 014, LAST HIREI: 10:34:24 10MAY09
NO INFORMATION STORED IN LIM 015, LAST HIREI: 10:34:25 10MAY09

 

[GFDANNHAUSER]

Hi there

Unplug the E1 cable from the the GJUL4 on LIM6, and the do a
GJTSP:LIM=6;

If it still shows free, the you might have a the incorrect E1 on the remote side, in other words layer one is up, because there is a loop on the spare E1's on the microwave link.
You see Layer 1 up, but you are not talking to the GJUL4 in BPOS 6-0-00.
Let me know if it goes bloev\cked when You unplug the cable from 6-0-00.

Best regrds

 

[GFDANNHAUSER]

Hi there

Unplug the E1 cable from the the GJUL4 on LIM6, and the do a
GJTSP:LIM=6;

If it still shows free, the you might have a the incorrect E1 on the remote side, in other words layer one is up, because there is a loop on the spare E1's on the microwave link.
You see Layer 1 up, but you are not talking to the GJUL4 in BPOS 6-0-00.
Let me know if it goes blocked when You unplug the cable from 6-0-00.

Best regrds