TechlordTX
MIS
Below is the Configuration that I got after connecting to the Router thru the HTTP:192.168.0.1 I am able to access the router but not load the SDM software since it keeps tellng me it cannot locate the router. Any help is appreciated.
------------------ show version ------------------
Cisco Internetwork Operating System Software
IOS (tm) C1700 Software (C1700-K9O3SY7-M), Version 12.3(13a), RELEASE SOFTWARE (fc2)
Technical Support: Copyright (c) 1986-2005 by cisco Systems, Inc.
Compiled Tue 26-Apr-05 07:06 by ssearch
Image text-base: 0x8000816C, data-base: 0x810872A8
ROM: System Bootstrap, Version 12.2(7r)XM1, RELEASE SOFTWARE (fc1)
ROM: C1700 Software (C1700-K9O3SY7-M), Version 12.3(13a), RELEASE SOFTWARE (fc2)
customcrest uptime is 2 days, 6 hours, 43 minutes
System returned to ROM by power-on
System image file is "flash:c1700-k9o3sy7-mz.123-13a.bin"
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
If you require further assistance please contact us by sending email to
export@cisco.com.
cisco 1721 (MPC860P) processor (revision 0x100) with 44345K/4807K bytes of memory.
Processor board ID FOC07050F3B (2895409470), with hardware revision 0000
MPC860P processor: part number 5, mask 2
Bridging software.
X.25 software, Version 3.0.0.
1 FastEthernet/IEEE 802.3 interface(s)
1 Serial network interface(s)
WIC T1-DSU
32K bytes of non-volatile configuration memory.
16384K bytes of processor board System flash (Read/Write)
Configuration register is 0x142
------------------ show running-config ------------------
Building configuration...
Current configuration : 902 bytes
!
version 12.3
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname customcrest
!
boot-start-marker
boot-end-marker
!
logging buffered 51200 warnings
enable secret 5
enable password
!
mmi polling-interval 60
no mmi auto-configure
no mmi pvc
mmi snmp-timeout 180
no aaa new-model
ip subnet-zero
no ip routing
!
!
!
no ip cef
ip audit po max-events 100
no ftp-server write-enable
!
!
username vpmis privilege 15 password 0
!
!
!
!
!
interface FastEthernet0
ip address 192.168.0.1 255.255.255.0
no ip route-cache
speed auto
full-duplex
!
interface Serial0
no ip address
no ip route-cache
shutdown
!
ip classless
ip http server
ip http authentication local
ip http secure-server
!
!
!
!
line con 0
line aux 0
line vty 0 4
privilege level 15
password
login local
transport input ssh
!
end
------------------ show version ------------------
Cisco Internetwork Operating System Software
IOS (tm) C1700 Software (C1700-K9O3SY7-M), Version 12.3(13a), RELEASE SOFTWARE (fc2)
Technical Support: Copyright (c) 1986-2005 by cisco Systems, Inc.
Compiled Tue 26-Apr-05 07:06 by ssearch
Image text-base: 0x8000816C, data-base: 0x810872A8
ROM: System Bootstrap, Version 12.2(7r)XM1, RELEASE SOFTWARE (fc1)
ROM: C1700 Software (C1700-K9O3SY7-M), Version 12.3(13a), RELEASE SOFTWARE (fc2)
customcrest uptime is 2 days, 6 hours, 43 minutes
System returned to ROM by power-on
System image file is "flash:c1700-k9o3sy7-mz.123-13a.bin"
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
If you require further assistance please contact us by sending email to
export@cisco.com.
cisco 1721 (MPC860P) processor (revision 0x100) with 44345K/4807K bytes of memory.
Processor board ID FOC07050F3B (2895409470), with hardware revision 0000
MPC860P processor: part number 5, mask 2
Bridging software.
X.25 software, Version 3.0.0.
1 FastEthernet/IEEE 802.3 interface(s)
1 Serial network interface(s)
WIC T1-DSU
32K bytes of non-volatile configuration memory.
16384K bytes of processor board System flash (Read/Write)
Configuration register is 0x142
------------------ show running-config ------------------
Building configuration...
Current configuration : 902 bytes
!
version 12.3
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname customcrest
!
boot-start-marker
boot-end-marker
!
logging buffered 51200 warnings
enable secret 5
enable password
!
mmi polling-interval 60
no mmi auto-configure
no mmi pvc
mmi snmp-timeout 180
no aaa new-model
ip subnet-zero
no ip routing
!
!
!
no ip cef
ip audit po max-events 100
no ftp-server write-enable
!
!
username vpmis privilege 15 password 0
!
!
!
!
!
interface FastEthernet0
ip address 192.168.0.1 255.255.255.0
no ip route-cache
speed auto
full-duplex
!
interface Serial0
no ip address
no ip route-cache
shutdown
!
ip classless
ip http server
ip http authentication local
ip http secure-server
!
!
!
!
line con 0
line aux 0
line vty 0 4
privilege level 15
password
login local
transport input ssh
!
end