Getting existing IP address 3Com 4210 Switch

[Walter349]

Can anyone tell me how to get the existing IP address for a 3Com 4210 switch. I can console onto the thing, but cannot find the command line string to show the configured IP address. I know whats its supposed to be, according to the label, but the records show that address against a different device.

'If at first you don't succeed, then your hammer is below specifications'

 

[allworxguy]

i believe "display current" will show you the running configuration.

Marv

http://www.telemarv.ca

 

[Walter349]

Thanks for the reply.
That command line only displays the current port status for the switch, it does not display any configuration information at all, even in system view.

'If at first you don't succeed, then your hammer is below specifications'

 

[Walter349]

Resolved the issue.
Never got it to display the current configuration. But simply set the IP addressing to DHCP, checked what came up as a new DHCP lease, then went back in on the webpage for that IP address and reconfigured the switch that way.

Job Done

'If at first you don't succeed, then your hammer is below specifications'