Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations IamaSherpa on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Get numbers of all extensions - Hipath 4000 1

Status
Not open for further replies.

Nasredine

Programmer
May 1, 2022
33
DZ
Hi,
I'm using the following command to get all subscribers numbers.
DISPLAY-SDAT:STNO=...,TYPE=SUBDATA

Is there another command that do the same thing ?

Kind regards.
 
DIS-WABE:TYPE=GEN,DAR=STN;
(DIS-WABE:GEN,,,,STN;)
This will show all the stations that are added.
If the Letter 'R' shows over on the right hand side - then that number is added but is not yet a station - so it's a spare number
If the Letter 'C' shows over on the right hand side - then that number is converted / translated to another number by the AMO RUFUM
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top