get Analog trunks from another BCM, that connected to my BCM vua VoIP 1

[NAA9983]

Dears,

I have BCM50 at site A, where there is no trunks, and I have another PBX BCm50 at site B, with Analog trunks, how I can access the analog trunks from Site A via Site B?

 

[Firebird Scrambler]

From my old norstar days, I thought it was something to do with the feature access packages so that site B will allow access from the VOIP trunks via e.g pool A onto the Analogue trunks that have been assigned pool B etc?.

All the best

Firebird Scrambler
Meridian 1 / Succession and BCM / Norstar Programmer in the UK

http://www.linkedin.com/in/davidbromley

If it's working, then leave it alone!.

 

[hawks]

firebird is on the right track you need to buld a Remote Package that allows the use of those lines. Then assign it to the Pools and Lines being used.

 

[norstarboy125]

You need to build a routes, dest codes, remote filters, target lines, it's a little involved...Good Luck

Jeremy J. Carter
Charm City Communications

http://www.charmcitycommunications.com

Norstar. BCM. CS1000 Programmer