We have a cs1000 on rls6 and a Tone Commander 9140 for e911 station reporting and PSAP reporting. The Station Table file on the 9140 is woefully out of date and I'm trying to figure out a way to update it with some sort of automation. Or at least generate a report from my cs1000 that will give me something close to the fields I need.
A very specific comma delimited file format is required for importing into the Administration Program
station table window. The five fields or columns of the database file, Station Number, ANI, Group
Number, Alt ID, and SLI.
How do these fields translate to Nortel naming convention?
Station Number = prime DN?
ANI =
Group Number =
Alt ID =
SLI = the location (ie cube number) - We use UserField0 and 1 for this.
If i can get this report right, I might maintain my sanity.
A very specific comma delimited file format is required for importing into the Administration Program
station table window. The five fields or columns of the database file, Station Number, ANI, Group
Number, Alt ID, and SLI.
How do these fields translate to Nortel naming convention?
Station Number = prime DN?
ANI =
Group Number =
Alt ID =
SLI = the location (ie cube number) - We use UserField0 and 1 for this.
If i can get this report right, I might maintain my sanity.
