GE COMMANDS 1

[fellicciano]

ANYONE COULD HELP ME WITH THE GE COMMANDS ?
I DONT`T KNOW HOW TO USE THEM, COULD ANYONE SHOW ME AN APLICATION EXEMPLE WITH THEM?

 

[Isinor]

You could try reading the GE operational directions in Alex.

GE commands are used in various applications... DECT (Mobility), IP Extension, Integrated Voice Mail, Free-seating & SMS.

GE extensions are not associated with an EQU position, they also do not use common categories, they have a CSP (Common Service Profile) which is just like a common cat with the TRAF SERV CIDIV and ADC parameters all messed about to confuse old timers.

This example is a Mobility DECT Extension

You should create a CSP (common service profile) first...
GESPI:CSP=0,TRAF=1113151515,SERV=206020000,CDIV=11510000,ROC=000001,NPRES=101;

Note CSP=0 has to be the first CSP code initiated in the exchange.

You then need a free EX number SUVIP:NUMTYP=EX; or NANSI:NUMTYP=EX,NUMSE=xxx;

Associate the DIR with a CSP…
GEDIIIR=2000,LIM= 3,CSP=0;

Then link the DIR to an IPEI and AUTHKEY
CXAKIIR=2000,IPEI=0000707404102,AUTKEY=1111;

Good luck