I was asked a few times what LG-Nortel product could replace the SOHO products "GDK-16 and GDK-20W", as they are not produced any more:
The solution for the costumer should be so, that all LKD-8 and LKD-30 and 2 wired cabling can be re-used.
The solutions - to my opinion - could be:
1.
ipLDK-20. Cabling and LKD phones can be re-used.
Added features are IP-trunk (SIP and H.323), IP-phones. DECT.
2.
IPECS-50. Cabling and LKD phones can be re-used.
Added features are IP-trunk (SIP and H.323), IP-phones. DECT
In version 5.0 of IPECS all these facilities are available.
A DTIB8 or SLIB8 module (or more) can be added, but the number of ports can maximum 50.
3.
ipLDK-60. Cabling can be re-used.
The LKD phones can not be reused. Use LDP72xx phones.
Added features are IP-trunk (SIP ), IP-phones (SIP).
Maybe these hints can help you on...
///doktor
The solution for the costumer should be so, that all LKD-8 and LKD-30 and 2 wired cabling can be re-used.
The solutions - to my opinion - could be:
1.
ipLDK-20. Cabling and LKD phones can be re-used.
Added features are IP-trunk (SIP and H.323), IP-phones. DECT.
2.
IPECS-50. Cabling and LKD phones can be re-used.
Added features are IP-trunk (SIP and H.323), IP-phones. DECT
In version 5.0 of IPECS all these facilities are available.
A DTIB8 or SLIB8 module (or more) can be added, but the number of ports can maximum 50.
3.
ipLDK-60. Cabling can be re-used.
The LKD phones can not be reused. Use LDP72xx phones.
Added features are IP-trunk (SIP ), IP-phones (SIP).
Maybe these hints can help you on...
///doktor