GATM 8

[jjling]

We ordered a Global Trunk Module for the BCM 2.5 that we have.

I was expecting the CTM 8 and we got the GATM 8. Are the pin outs of the amphenol the same as the Norstar analog trunk module?

THanks

 

[jjling]

Which pins are the Analog Trunks connected to?

 

[JohnnyGrep]

Think of it this way: GATM 8 has the same wiring as a 12X0 with 2 analog line cards.

 

[AlquestTech]

I have another question on the GATM8
I have 2 installed on Bus 5 and the problem is that the software is telling me that there are only 4 ports on each card, not 8. The cards have GATM8 printed on the front.
I have set the first card offset 0 and the 2nd card with offset 2 thus:
Card 1
1 on
2 on
3 on
4 on
5 off
6 off

Card 2
1 on
2 off
3 on
4 on
5 off
6 off


I also have DTM's on busses 6 and 7 and DSM32+ on busses 2-4.
Everything else seems to work fine.

It only shows a total of 8 lines in active lines (besides my digital trunks) too, instead of the 16.


Any ideas of what could be causing this? Are my offsets correct?