Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Chris Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Gateway error

Status
Not open for further replies.

msk69

MIS
May 29, 2020
335
PK
Hi, it is CM release 8.0 and gateway is G450.
We are getting the below gateway errors. For a remedy I reinstalled Gateway from scratch, updated Firmware, and also tried a hard reboot but after every activity gateway works quite well for one or two day. After this one or two-day period, gateway again pops out errors and then gets stuck or restart.
can someone suggest a solutio?

Gateway Error
=============
+ Hardware failure, mmid = v0, 06/09-09:02:29.00
+ DSP Failure, mmid = v0, 06/09-09:02:29.00
+ CORE Failure, mmid = v0, 06/09-09:02:29.00

Current Alarm Indications, ALM LED is on
--------------------------------------------------------------------------
+ MGP VOIP Failure
 
did the reseat activity but still the same problem
 
Looks like a DSP problem

commands:
show voip-parameters
show voip-dsp
show platfom mainboard
test voip-dsp
 
Motherboard on g450 appears to be defective.

A great teacher does not provide answers, but methods to teach others "How and where to find the answers"

bsh

49 years Bell, AT&T, Lucent, Avaya
Tier 3 for 39 years and counting
[URL unfurl="true"]http://bshtele.com[/url]
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top