gatekeeper neighborgs configuration

[mediterr]

hi

I have two gatekeepers (MCM-cisco2621mx, with ios 12.3 jsx)

the configuration of GK is:

gatekeeper
zone local GK mio.com
zone remote GK2 otro.com 192.168.10.10 1719
zone prefix GK 226....
zone prefix GK2 5....
gw-type-prefix 1#* default-technology
lrq forward-queries no shutdown
!

the second gatekeeper (GK2):

gatekeeper
zone local GK2 otro.com
zone remote GK mio.com 192.168.210.85 1719
zone prefix GK 226....
zone prefix GK2 5....
lrq forward-queries
no shutdown
!

i have two terminals H323, one register on the GK (zone 226) and other on the GK2 zone (5)

So, when i call 2267721 or 52345 the call not connect.

I need your help please.
Sincerely thanks!!!

 

[jeter]

Did you setup your dial-peers correctly?

dial-peer voice 1 voip
destination-pattern 226....
session-target RAS



Go Army!
Tek-TIP Member 19,650

 

[mediterr]

hi !!!

Yes i have to configured the dial peers but no function!!!

in the GK this are the dial peers
dial-peer voice 1000 voip
destination-pattern 226....
session target ras

dial-peer voice 1002 voip
destination-pattern 5....
session target ras


in the GK2 this are the dial peers
dial-peer voice 1000 voip
destination-pattern 226....
session target ras


!
dial-peer voice 1002 voip
destination-pattern 5....
session target ras


what is the problem??? please helpme!
very thanks

 

[jeter]

Can you possibly insert a drawing of your network? I would like to get a clearer picture...




Go Army!
Tek-TIP Member 19,650

 

[mediterr]

Hi

this is my topology


Host1--------GK------------GK2--------Host2
zone 226.... zone 5....


Very thanks

 

[jeter]

Lets start at the source.. Perform this test
(show dialplan number 226xxxx or 5xxx) depending on what router your on.

Verify the test output to trace the problem...

Test from both routers to verify the path.....


Go Army!
Tek-TIP Member 19,650