I currently have 3 G700's in one stack and would like to consolidate all stations/trunks into the first 2 to cut down on maintenance costs. The 3rd G700 that I want to remove is currently showing as the master controller of the stack. Can I remove translations, power down and remove this G700 from the stack and will one of the other 2 G700's automatically assume the role of master controller? Any help/suggestions would be greatly appreciated. Thanks!
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
G700 Master Controller
- Thread starter avguytim
- Start date
jimbojimbo
Vendor
Maybe but probably not. The G700s will work however the underlying P330 Chassis will have issues since in a stacked configuration only one P330 chassis is set with the IP Address. Your stack should have 3 on the top, 2 in the middle, and 1 on the bottom (if installed correctly). Your best bet is to remove the top G700 and leave 1 and 2 in service.
- Status
Similar threads
- Locked
- Question
- Locked
- Question