G700 BRI to Patton Gateway

[henningwentzel]

Hi,

I am trying to setup a BRI trunk on a MM720 BRI media module on G700/S8300C with CM 4.0.4 to a Patton Gateway ISDN BRI gateway. There has been a previous posting for IP Office 403 vers. 3.0. to BRI card and not sure if this was resolved. Would appreciate if anyone could share their Avaya administration with me. At present I have a trunk group with one channel setup and displays it as in service and idle but no call processing, I get denial events when trying to access the trunk. Denial event 1117 when BRI is set to user and denial event 1220 when BRI is set to network.

 

[Bas1234]

Better try here in the Definity forum;

http://www.tek-tips.com/threadminder.cfm?pid=690

___________________________________________
It works! Now if only I could remember what I did...

Dain Bramaged
___________________________________________

 

[Bas1234]

Also have a look here;

http://www.avayausers.com/search.php?searchid=2126713

___________________________________________
It works! Now if only I could remember what I did...

Dain Bramaged
___________________________________________