Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

G450 - Start IP Trunk

Status
Not open for further replies.

CHNascimento

Technical User
Aug 12, 2008
52
0
0
Hi People!! I have the following doubt:

My costumer have 1 S8300/G450 and he want to connect him office with the "matrix" by IP Trunk!!

What I need todo that??

Hardware (Media modules)?
Licenses (I think no)?

* Or nothing further? Only create the Trunk configuration and use the ehthernet port!!

Thanks for any help!!


CH ;-)
 
Let me try an interpret:

His customer has heard how wonderful all of this IP stuff is, and now wants to make "free" phone calls on the internet, is that about it?

Sorry, you will need a SIP provider, or get one of the 50 or so alternate phone companies like Vonage, etc, and interface that line to your PBX, nothing is for free in this world.

Mitch


AVAYA Certified Specialist
 
Sorry funny guys!! hahaha

I don't speak english, I only try it!! hahaha

Let's go to the doubt!! My costumer think about interconnect his office (BR) with another office (USA). Both of the same company (ok, understood hahaha)!!?

He has a Private link with 2MB bandwidth!!! And now this link will grow!! This is the scenario for my doubt!!

When I use G650 I need Clan and MedPro (mainly) and codecs and other requisites!! What I need to do a IP trunk using G450 cab!!??

Thanks funny Guys hahuahaha

CH ;-)
 
You need to build IP trunks, make sure both systems have "H323 IP trunks", if not you will have to get them added. once you have the ability to add H323 IP trunks, there are several documents that can show you how to set it up. You basiclly have to have IP to IP connectivty between the S8300/G450 and the remote systems CLANs/MEDPROs, once you establish that, you add a signalling group on each end, and a trunk group on each end, and then UDP the extension range of each switch, to the other switch. You will also have to setup an IP Network Region and a codec set to use as well.

Mitch


AVAYA Certified Specialist
 
Thanks Mitch!! Sorry for my later response!

mrjedi: I was in the real world, fighting with Smith!! hahaha


thanks guys!!
[]´s



CH ;-)
ACA - Design IP Telephony
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top