I have 2 G450 MGs, both at 30.18.1, but the announcement tones are different. For one of them after I enter the announcement extension, it gives me stutter, which I believe is correct. The other (and a few more like it) just provide dial tone. Does anyone know a reason for this?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
G450 Announcements/Tones
- Thread starter teej0820
- Start date
wildcard100001
Technical User
Probably hardware differences... It should not matter as long as its working.
Wildcard
Wildcard
AvayaTier3
Technical User
Once a telephone user accesses an announcement session, the user can dial 1 to
record an announcement, 2 to play an announcement, or 3 to delete an
announcement. If the announcement source memory is more than 90% full, then the
switch gives stutter dial tone when the user gains access to an announcement
session. Even if the user hears stutter tone, the user can begin speaking to
record the announcement.
A great teacher, does not provide answers, but methods to teach others "How and where to find the answers"
bsh
37 years Bell, AT&T, Lucent, Avaya
Tier 3 for 27 years and counting
record an announcement, 2 to play an announcement, or 3 to delete an
announcement. If the announcement source memory is more than 90% full, then the
switch gives stutter dial tone when the user gains access to an announcement
session. Even if the user hears stutter tone, the user can begin speaking to
record the announcement.
A great teacher, does not provide answers, but methods to teach others "How and where to find the answers"
bsh
37 years Bell, AT&T, Lucent, Avaya
Tier 3 for 27 years and counting
- Status
Similar threads
- Question
- Locked
- Question