G450 and Faxing

[micford]

I have a G450 with a PRI. When ever you fax out of the system on a MM711AP HW11 FW 91 the fax will go through and connect but when you receive the fax the page will be blank.On the ip codec set 1 I have fax set for pass-through. I have tried all options on this page. This is a stand alone system.

 

[Mitch672]

Mike,

try changing the FAX machine speed to 9600/9600, as high speed Faxing doesn't work too well with media gateways.

mitch (hehe)


AVAYA Certified Specialist