G430 SLS mode

[dcourter]

I am configuring a G430 for SLS mode. After the gateway registers and I have an IP set connected I disconect the clan to my G650 which drops my g430 and my IP phone. The ip phone then trys to register with my g430 which is now in SLS mode and the phone just says discovering "ip of my G430" I have the station setup in my g430 is there something else i am missing to get it to connect? SLS is turned on and the station is setup and I can also ping the G430 from the network. Thanks.

ACA - IP Office Implement

 

[dcourter]

is there a way to check that the internal IP media board is working?

ACA - IP Office Implement

 

[dcourter]

So first setup i used the G430 setup script then erased the config and typed all in by hand and now it works. So im not sure what is wrong with the script

ACA - IP Office Implement

 

[ryabtcev]

Hi, i have the same problem. Can you send your configuration? Thanks

[Posted by 213.129.118.19 via

http://webwarper.net/ru

This is added while posting a message to avoid misuse.
Try:

http://webwarper.net/webwarper.exe

Example of viewing:

http://webwarper.net/ww/~av/lycos.com

]

 

[eatlog]

Have you tested this on the change station xxxx and add the node name of the Gateway on "Survivable GK Node Name" . Let me know if phones will register to the SLS.

 

[dcourter]

Ryabtcev I have sense disassembled my setup so dont have the 430 to look at the settings. All i know is i put in the same info that i entered into the setup script manually and it started working. Also as eatlog said be sure to include the name of the 430 in the survivable gk section of the station.

ACA - IP Office Implement