G3siV6 remote programming announcement (TN750c) 1

[chris5225]

Hi
thanks in advance
Is it possible to remote login to a G3siV6 and have someone program (use their voice) on the announcement card (TN750C)the logins i have accss to with the passwords on this particular switch are dadmin, inads, and craft (plus the lower levels)
thanks
chris

 

[4merAvaya]

You can use the Remote Access feature (assuming it has not been permanently disabled). Set up a Barrier Code and assign the extension a COS with Console Permissions.

Kevin

 

[chris5225]

Hi Kevin
and thanks
Yes I can remote login on all 3 logins. My question is can I remotly change the announcements on the TN750c without having to be on site
Never mind it just hit me. the sta with consul perm can record.
Thank you very much Kevin
Chris

 

[chris5225]

hi
i figure i should clarift thi post so that will be of use to others. . .
Remote in is not remot programming, it is the remote sta (ie 125) for the remote use of the switch. for example you dial the main number get the auto attd dial the sta # xxx and get dialtone.
Thanks again Kevin -- I had a brain lock --working too many hours
thanks
chris