Anyone out there try to connect a G3si to a S8300 via fiber. We have a portion of our campus that has lost connectivity to the PBX and it is too expensive to run new cable so we have tried to place a S8300 out in the affected area and try to connect back to the G3si via fiber converters. *** G3si > TN464 > media converter > fiber link > media coverter > MM710P >S8300 ***. The general idea was to connect these two and make the S8300 a node, UDP the native stations to the node to supply phone service. Problem is that the TN464/MM710 will not link up with the media converters. Tried a crossover T1 cable and straight thru, no joy. Fiber link is great. What am I missing or is this not possible. Thanks in advance for your suggestions.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
G3si connection to S8300 via fiber
- Thread starter grod1
- Start date
Similar threads
- Locked
- Question