Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

G250 WAN Port

Status
Not open for further replies.

SirArthur

Technical User
Nov 17, 2008
15
AT
Dear users,
how is it possible to connect the WAN Ports to the Ethernet Ports, my problem is that my IP Phones don't get any DHCP adresses of an external DHCP server, because of the problem that the packages are not routable over the WAN port (FastEthernet 10/2)? The Ip Phones are connected on the ports 10/3-10/10!

Any suggestions?
 
What I do is connect one of the 10/3 to 10/10 ports to the customers LAN, I don't use the WAN port. Then there is no issue at all, of course you can only use 7 IP Phones this way.



Mitch

AVAYA Certified Expert
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top